water filling machine Rinser/Filler/Capper Monobloc Size of bottle: 500ml (300ml-1500ml) not returnable square or round PET bottle. Closure type: 28 38mm standard plastic screw caps Method of bottle transferring: by neck Products: mineral, pure, still water. Composition: -Base -Rinser -Filler -Capper -Control system 1.Rinser -Rotative rinsing turret one treatment, fixed nozzles, with grippers. -The grippers take the bottles from the inlet starwheel while they are still driven by the starwheel, thus guaranteeing a safe grip. -After the gripping, the bottle is turned upside down and centred above a spraying nozzle which directs a stream of rinse water into the bottle. After the draining period the bottle is turned over to an upright position again. 2. Filler -The starwheels drive the bottles always by the neck through the rinsing, filling and capping steps. For the various types of bottle, it is easy to adjust the structure for the operator by our specialized design. - The filling valves are fully made of stainless steel with food grade, sterilization-resisting plastic gaskets. The valves are secured to the bowl and allow easy assembly and disassembly. 3. Capper -Rotative capping turrent, suitable to the application of screw plastic caps on PET bottles -The fixed part consists of the cap hopper, the cap feeder with relevant motor and the cam actuating the capping heads. -The heads are raised and lowered by the action of a follower that is riding on a shaped cam. If you need any other information, please contact us.